Hey everyone, I’m Jake with the bimetal valve plates supply crew—yep, the guy you hit up when you need durable, long-lasting valve parts for your pipelines, refineries, or whatever operation keeps your fluids moving. I’ve been doing this for 7 years now, and let’s cut to the chase: even if you buy the toughest, most precision-machined bimetal valve plates on the market, they’re gonna go bad way faster than they should if you just toss ’em in a corner and forget about ’em. I’ve seen it so many times—clients call me panicking because their brand-new plates got corroded, warped, or covered in grime right after they unloaded the shipment, and half the time it’s not the plates’ fault. It’s how they stored ’em. Bimetal Valve Plates

First off, let’s quick recap what makes bimetal valve plates special, just so we’re on the same page. We make ’em by fusing two different metals—usually a hard, wear-resistant alloy (like chrome-based or tungsten carbide) on the sealing face, and a tougher, more corrosion-resistant steel core on the back. That combo lets ’em handle all the beatings: high pressure, abrasive slurries, corrosive chemicals, whatever your line throws at ’em. But here’s the thing: the two metals don’t always play nice if exposed to the wrong conditions, and that’s where storage mistakes sneak in. I’ve watched a client leave a stack of plates on a concrete warehouse floor that’s slightly damp from a leaky roof, and within 3 months, the edges where the two metals meet started showing tiny rust spots. That’s galvanic corrosion, by the way—when two dissimilar metals sit in a moist environment, they create a tiny battery and eat away at the weaker layer. Not the look you want when you’re slapping a brand-new valve together.
Let’s start with the most basic, yet most messed up storage mistake I see: ground contact. I get it—when you unload a pallet of valve plates, you just need to get ’em off the truck fast, so you set ’em on the warehouse floor. But concrete (even the “dry” kind) holds moisture, sometimes even hidden under the surface. And if your plates have any exposed edges (we wrap ours in protective plastic, but sometimes that tears during shipping), those edges will hook up with that moisture and concrete’s random chemicals, and bam—rust before you even use the plate.
So what’s the fix? Elevation, plain and simple. Don’t set your plates directly on the floor. Use plastic pallets, metal racks, even stackable plastic bins with raised feet. Wait, but hold on—stacking them on pallets isn’t just “lift it up and done.” There’s a right way to stack them, and a wrong way. If you just pile 20 plates all willy-nilly, the ones on the bottom get crushed a little, warping the sealing face (which is the part that’s supposed to seal tight to stop leaks—warp that, and you’ve got a whole other headache).
The right stacking method? First, make sure each plate is separated by a thin layer of something soft, non-abrasive, and non-conductive. We use food-grade cardboard inserts for our shipments, and those are perfect for storage too—they don’t scratch the sealing face, they soak up any tiny bit of moisture that sneaks in, and they keep the metal plates from rubbing together. Wait, but cardboard can get wet too, right? Exactly. So if your warehouse has even a hint of humidity, check those inserts every month or so. If they’re damp, swap ’em out for dry ones. And when you stack, don’t pile more than 10 or 12 plates high. More than that, the weight on the bottom ones will warp that critical sealing surface. I had a client once who stacked 25 plates like they were firewood, and when he went to install them, half the bottom ones wouldn’t seal—had to send ’em back, cost him downtime AND replacement plates. Not cool, and totally avoidable.
Next up, moisture control. This is the big one. I’ve had so many clients tell me, “My warehouse is dry, so I don’t need to worry about moisture.” Let’s be real—no warehouse is 100% dry. You’ve got open doors, humid air getting in during summer, pipe leaks, even condensation from temperature changes (when it’s 60 degrees in the morning and 80 at noon, moisture forms on cold metal—hello, condensation). For bimetal plates, that’s a recipe for galvanic corrosion and surface rust on the non-sealing faces.
So what’s the move here? Let’s split this into two parts: short-term storage (under 6 months) and long-term storage (over 6 months). For short-term, if you’ve got your plates in the original packaging (the plastic we wrap ’em in is coated with a light rust inhibitor, by the way), just keep that packaging sealed as much as possible. We mark every shipment with “Store in Dry Area, Avoid Direct Moisture” for a reason—don’t throw that plastic wrap away until you’re ready to install the plate. For long-term, though, you need more than just original packaging. I recommend adding desiccant packs inside the plastic wrap or storage bins. Desiccants are those little beige packets you see in shoe boxes and electronics—they suck up moisture from the air. How many do you need? A good rule of thumb is 1 pack per 5 square feet of storage space for metal parts. And swap them out every 3 months if it’s super humid in your area. Also, if you’re storing in a metal rack, make sure the rack itself is dry—wipe it down once a month if you notice any rust forming on the rack bars, because that rust will transfer to your plates.
Another thing I hate seeing: storage near chemicals. A lot of operations store valve parts near cleaning supplies, solvents, or even the raw materials they use in their process. But fumes from chemicals (like chlorine, ammonia, or even strong detergents) can eat away at the protective coatings on your bimetal plates, or even react with the metal layers. I had a client who stored a pallet of plates next to a stack of industrial cleaning chemicals, and within 4 months, the sealing faces were pitted with tiny holes—turns out the chemical fumes reacted with the tungsten carbide layer, making it weak and useless. So keep your valve plates in a separate area, away from any chemicals or harsh fumes. If you have to store them in the same bay, seal the plastic wrap extra tight and add an extra layer of plastic to keep fumes out.
Wait, what about handling during storage? Even if you store them right, if you’re grabbing plates wrong, you can mess ’em up. Never lift a valve plate by the edges—hold it by the flat, non-sealing back side. If you grip the sealing face (the smooth, hard part that’s supposed to seal), you’ll leave finger oils, scratches, or even dents, which will ruin the seal when you try to use it. Those finger oils are especially bad because they have moisture and salts, which will cause rust way faster than plain air. I tell my team to always use clean cotton gloves when handling plates, and I remind clients the same thing—no bare hands on the sealing face or exposed edges.
Oh, and temperature control! I know, you’re thinking “it’s just metal, temperature doesn’t matter that much” but it does. Extreme temperatures—like a warehouse that drops to 30 degrees in winter or hits 95 in summer—can cause condensation (when warm, humid air hits cold metal, or vice versa) and even make the plastic wrapping brittle, which tears and lets moisture in. Try to keep your storage area between 50 and 75 degrees Fahrenheit, if possible. It’s not always easy, but it’s worth it. I had a client in Texas who stored his plates in an uninsulated warehouse that hit 98 degrees every summer, and his plates started rusting in 2 months—once he moved ’em to an insulated warehouse, the rust stopped cold.
Let’s talk about the “small stuff” that people overlook, too. Labeling. If you’re storing multiple sizes or grades of bimetal valve plates, label every bin or stack clearly. Nothing’s worse than digging through a pile of 15 identical-looking plates at 2 a.m. when you need a specific size for an emergency repair, and dropping or scratching a bunch of them in the process. Also, keep an inventory log—note when you got the plates, when you last checked their condition, and how long they’ve been in storage. Most bimetal plates can last up to 2 years in proper storage, but if you go longer than that, you should do a quick inspection before using them—check for rust, dents, or warping.
Wait, I should also address a common myth: “I can use oil to protect my plates.” Yeah, you can, but only if you use the right kind, and clean it off properly before installation. Some clients spray their plates with regular motor oil or a cheap rust inhibitor, but that can leave a residue that messes with the valve’s seal—oil and fluid don’t mix, right? We recommend using a food-grade, non-corrosive rust inhibitor specifically made for metal valve parts, and only applying a thin, even coat. And make sure to wipe it all off with a clean cloth before you install the plate—no one wants oil in their pipeline, especially if they’re moving food, pharmaceuticals, or clean water.
Let me wrap this up with a quick story that drives this all home. Last year, a refinery in Louisiana called me up, super stressed, because they had a batch of 50 bimetal valve plates that were supposed to go into a shutdown the next week, and half of them had rust spots. They swore they stored them perfect—on pallets, in a dry warehouse, no chemicals around. When I asked for details, they said they stacked ’em 30 high, used cardboard inserts that had gotten damp from a leaky roof, and had stored ’em for 8 months without checking the desiccant packs. Oops. We ended up replacing the bad plates, but I also gave them a whole storage guide tailored to their warehouse. A year later, they called to say their new batch had zero issues. That’s the difference between knowing what you’re doing and winging it.
Here’s the bottom line: proper storage for bimetal valve plates isn’t rocket science, but it’s specific. It’s not just putting metal parts in a corner. It’s elevating to avoid moisture from the floor, keeping humidity low with desiccants, avoiding chemical fumes, handling them with care, and keeping an eye on their condition. Mess this up, and you’re looking at rusted, warped, or pitted plates that will leak, cause downtime, and cost you way more than if you’d taken the 10 minutes to store them right.

If you’re just ordering bimetal valve plates from us, we’ll include a free storage tip sheet with every shipment—no fine print, just the stuff we’ve learned from 7 years of dealing with clients’ storage mistakes. And if you’re having issues with the plates you have now, or just want to chat about the best way to keep your next batch in good shape, hit us up to connect for a supply and storage discussion. We’re here to help, not just sell parts.
Hydraulic Pump Parts REFERENCES
ASM International. (2020). Corrosion Prevention and Control. ASM Handbook, Volume 13A: Corrosion.
NACE International. (2018). Storage and Preservation of Metallic Components for Industrial Applications. Recommended Practice RP0775.
Valve Manufacturers Association. (2021). Proper Handling and Storage of Valve Components. Technical Bulletin TB-019.
Qingzhou Baiyun Anti-friction Products Co., Ltd.
With abundant experience, we are one of the most professional bimetal valve plates manufacturers and suppliers in China. Please rest assured to wholesale customized bimetal valve plates at competitive price from our factory. Welcome to contact us for quotation.
Address: Linglongshan North Road (south of the railway bridge), Economic Development Zone, Qingzhou City, Weifang City, Shandong Province
E-mail: byantifriction@gmail.com
WebSite: https://www.baiyunbimetal.com/