Posted in

Is Galvalume steel suitable for snow loads?

Hey guys, let’s cut to the chase: if you’re in the construction or roofing game, you’ve probably stared out at a snowdrift mid-winter and thought, “Will my roof hold up?” That’s the question that gets thrown my way every single week as a Galvalume steel supplier—no exaggeration, it’s like 70% of the calls and DMs I get this time of year. So let’s break this down straight, no jargon, no sales fluff, just real answers you can use to stop stressing (or start planning your next roof project right). Galvalume Steel

First, let’s be clear on what Galvalume steel even is, because a lot of folks mix it up with regular galvanized or aluminum. I see it all the time: someone will say, “I use aluminum siding, so Galvalume is the same” and then wonder why it corroded way faster than expected. Nope, Galvalume is its own beast—it’s a steel core coated with a mix of 55% aluminum, 43% zinc, and a tiny bit of silicon. That coating isn’t just for looks, it’s what makes it different when heavy snow, ice, and slush are on your roof.

Now, snow load isn’t just “how much snow is on the ground.” The technical term (but we’ll keep it simple) is the design snow load, which depends on where you live, how steep your roof is, and even the shape of your building. For example, a flat roof in Minnesota has to handle way more weight than a sloped roof in Texas—like, up to 50 pounds per square foot vs. 20 or less. That number is non-negotiable; building codes actually require you to check the local load specs before picking materials.

So back to the big question: is Galvalume steel suitable for these loads? Short answer: yes, when it’s installed right, and you pick the right thickness for your area. But let’s dive into why that’s true, and when it might not be your top pick.

First, the steel core itself is super strong. We work with gauges from 22-gauge (thin, good for sidings or low-load areas) all the way down to 14-gauge (thick, heavy-duty for commercial buildings in snow-heavy regions). Galvalume’s strength is basically on par with regular carbon steel, which is the go-to for structural stuff anyway. But wait—can it handle the extra weight of snow? Let’s do a quick real-world example: a 14-gauge Galvalume roof panel, installed on properly spaced purlins (those are the horizontal beams that hold your roof up, right?) can easily handle 50 lbs per square foot. That’s enough for a big snow dump, plus the ice that forms when that snow melts and refreezes. Compare that to some other popular roof materials: asphalt shingles are light, but their roof structure has to be strong to support them? No, wait—actually, asphalt shingles themselves are only a few pounds, but the problem is they can trap moisture, which weakens the underlying structure. Standing-seam metal roofing, which most Galvalume is made into, has a interlocking design that distributes weight evenly, so it doesn’t put stress on one spot. That’s a huge win for snow loads, because snow piles up unevenly—drifts are heavier in one corner than another.

But here’s the catch: the Galvalume coating doesn’t add much strength. The strength is all the steel core. So if you skimp on gauge to save a few bucks, that’s when you run into issues. I’ve seen it happen: a homeowner in Michigan tried to put 26-gauge Galvalume on his garage, cut corners on purlin spacing, and when we had that 2022 blizzard, his roof bowed. It wasn’t the Galvalume’s fault—it was the thin steel and wrong installation. So that’s the first rule: match your Galvalume thickness to your local snow load code. If you’re unsure, just shoot me a message, I can point you to the right specs.

Another thing people don’t talk about is thermal expansion. When snow melts during the day, then refreezes at night, that cycle makes your roof expand and contract. Regular galvanized steel can expand a lot, right? But Galvalume’s aluminum coating actually gives it better thermal stability than pure zinc, so it doesn’t warp or bend as much with those temperature swings. Warped panels mean gaps where snow can get under, or even more importantly, weak spots where ice dams can form. Ice dams are a nightmare because they add extra weight—like, a single ice dam can add 10 lbs per square foot on its own. Galvalume’s rigidity (thanks to the steel core) means it’s way less likely to bend under that extra weight than, say, a vinyl roof, which can sag and let ice build up even more.

Wait, but what about corrosion? Some folks say, “If it snows a lot, there’s moisture, so will Galvalume rust?” Great question, because corrosion can weaken steel over time. The Galvalume coating is actually way better than regular galvanized at resisting corrosion, especially in wet, snowy areas. The aluminum in the coating forms a protective oxide layer that blocks moisture from getting to the steel core, even if a scratch happens. Zinc acts as a sacrificial layer, so if that oxide layer gets broken, the zinc corrodes instead of the steel. In snowy climates where salt is put on roads (which splashes up onto roofs), Galvalume holds up way better than aluminum or even stainless steel—we’ve had customers in Maine say their Galvalume roofs are 15 years old and still look like new, no rust spots. That means no structural weakening from corrosion, which is a huge deal for long-term snow load performance.

Now, when is Galvalume not the best for snow loads? It’s not a one-size-fits-all, obviously. If you’re in an area with extreme, extreme loads—like the mountains of Colorado where snow can hit 80 lbs per square foot, or even more for heavy wet snow—you might want to go with a thicker gauge, like 12-gauge, or even go to a higher-grade steel, like Galvalume Plus (which has an extra layer for extra corrosion resistance in salt-heavy areas). Also, if you’re doing a really low-slope roof (less than 1/4 inch per foot), you need to make sure the panel design has proper drainage, so water and melting snow don’t pool. Pooled water adds extra weight, and even though Galvalume is strong, pooling over time can lead to corrosion if you don’t have the right slope. But that’s an installation thing, not a Galvalume thing—we can help you pick the right panel profile for low-slope roofs too.

Let me throw in a quick real customer story to make this relatable. Last year, a commercial builder in upstate New York hit me up panicking because their old asphalt roof on a warehouse was leaking after a heavy snowstorm, and they needed a replacement fast. They were worried about snow loads, because their warehouse spans 100 feet, so they couldn’t have a weak roof. We recommended 14-gauge Galvalume standing-seam panels, installed on 24-inch purlin spacing (which is standard for 50 lbs per square foot loads). They went with it, and this past winter, they told me they had a 3-foot snowfall, plus two ice storms, and the roof didn’t budge—no leaks, no bows, nothing. They’re now coming back for two more warehouse projects this year. That’s the kind of proof you can’t get from a textbook.

Another thing to consider: maintenance. Snow load isn’t just about when it’s heavy—you have to remove snow safely, right? With Galvalume, because it’s a metal panel, you can use a roof rake to pull off snow without damaging the roof, as long as you do it gently. I’ve heard horror stories of people using shovels and scraping asphalt shingles, which ruins them. With Galvalume, as long as you avoid sharp tools, it holds up. But again, that goes back to installation: if the panels are properly fastened (we use hidden fasteners, not exposed ones, which reduces leaks and keeps the panels secure), you won’t have to worry about them shifting when you rake snow.

So to wrap this up, let’s answer the original question clearly: yes, Galvalume steel is absolutely suitable for snow loads, as long as you do two things: 1) pick the right steel thickness and panel profile for your local building code’s design snow load, and 2) get it installed by someone who knows what they’re doing (not just a guy who hangs sheets willy-nilly). If you skip either of those, no material will hold up—whether it’s Galvalume, steel, or even concrete.

Now, if you’re in the middle of planning a roof project, replacing a roof, or just have questions about what gauge you need, or which panel works best for your area, don’t overthink it. Hit me up—we don’t do pushy sales, just straight answers about what works for your needs. I’ve been in this game for over a decade, I’ve helped hundreds of folks from homeowners to big builders in snowy states pick the right Galvalume products. No confusing jargon, no hidden fees, just honest advice.

API Spec 5L PSL1 Pipeline Steel Plate And one last pro tip: don’t wait until the first snow to check. If you’re in a cold climate, order your materials now, so you’re not stuck waiting for delivery when the first storm hits and everyone’s backordered. Trust me, I’ve been there, it’s a headache I don’t want anyone to go through.

References

  1. American Society of Civil Engineers. (2016). Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE 7-16).
  2. Steel Construction Institute. (2020). Cold-Formed Steel Design for Roof Systems.
  3. International Code Council. (2021). International Building Code (IBC) Chapter 15: Roof Assemblies.
  4. Galvalume Steel Product Manual. (2022). United States Steel Corporation.

Gnee Steel (Tianjin) Co., Ltd.
Gnee Steel (Tianjin) Co., Ltd. is one of the most professional galvalume steel manufacturers and suppliers in China, specialized in providing high quality products and service. We warmly welcome you to wholesale galvalume steel at competitive price from our factory. Contact us for customized service.
Address: No.4-1114, Beichen Building, Beicang Town, Beichen District, Tianjin, China
E-mail: info@gneesteels.com
WebSite: https://www.chinasteelplates.com/