{"id":3808,"date":"2026-11-21T23:10:22","date_gmt":"2026-11-21T15:10:22","guid":{"rendered":"http:\/\/www.intermediaecuador.com\/blog\/?p=3808"},"modified":"2026-11-21T23:10:22","modified_gmt":"2026-11-21T15:10:22","slug":"what-type-of-building-wire-is-for-general-lighting-4b5b-eeb4c4","status":"publish","type":"post","link":"http:\/\/www.intermediaecuador.com\/blog\/2026\/11\/21\/what-type-of-building-wire-is-for-general-lighting-4b5b-eeb4c4\/","title":{"rendered":"What type of building wire is for general lighting?"},"content":{"rendered":"<p>Hey everyone,<br \/>\nAs a building wire supplier who\u2019s fielded hundreds of questions from electricians, contractors, and even DIY homeowners over the last 10+ years, I can\u2019t tell you how many times someone\u2019s stopped me at a job site and asked: \u201cWait, which wire do I use for general lighting?\u201d It sounds simple, right? Just grab whatever\u2019s labeled \u201clighting wire\u201d from the supply closet. But trust me\u2014pick the wrong one, and you\u2019re looking overloaded circuits, overheating wires, or even a code violation that\u2019ll hold up your final inspection. Today, let\u2019s break this down like we talk at the trade counter\u2014no boring textbook jargon, just what actually works for your average residential or small commercial lighting setup. <a href=\"https:\/\/www.liangyucable.com\/building-wire\/\">Building Wire<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.liangyucable.com\/uploads\/48120\/small\/copper-control-cable9122b.jpg\"><\/p>\n<p>First off, let\u2019s start with the basics: general lighting, 9 times out of 10, is low-current stuff. We\u2019re talking recessed cans, pendant lights, table lamps, maybe a few wall sconces\u2014nothing like a range oven or a power tool that draws 20+ amps. That means the wire you pick doesn\u2019t need to be thick enough for heavy loads, but it does need to be up to code for where it\u2019s running. Let\u2019s cut to the most common type everyone\u2019s familiar with: NM cable. Yeah, that\u2019s the Romex you\u2019ve had in your truck since your first apprenticeship\u2014NM stands for Non-Metallic, and it\u2019s the go-to for most indoor residential runs in walls, attics, and basements. Wait, but not all NM is the same, right? For general lighting, you want NM with a copper conductor (aluminum is cheaper, but it\u2019s a pain to splice and can corrode over time, so we don\u2019t recommend it for lighting anymore) and a 14-gauge wire. Let me explain why that matters: 14-gauge copper wire is rated for 15 amps max, which is exactly the NEC (National Electrical Code) sweet spot for 120V general lighting circuits. The average lighting circuit in a home can handle about 1,800 watts\u2014way more than your typical bedroom or living room lights, which rarely add up to 1,000 total. I\u2019ve seen guys grab 12-gauge \u201cjust to be safe,\u201d and while that\u2019s not dangerous, it\u2019s overkill. Thicker wire costs more, takes up more space in boxes, and you don\u2019t need it for lighting. 14-gauge is the standard for a reason.<\/p>\n<p>Now, hold on\u2014NM isn\u2019t the only game in town. What if you\u2019re running lighting in an area where NM can\u2019t be used? Like a basement that\u2019s unfinished, or an attic where there\u2019s exposure to physical damage or extreme temperatures? That\u2019s where THHN\/THWN-2 wire comes in. This is a single conductor wire, not a jacketed cable like Romex, so you have to pull it through conduit. But don\u2019t sleep on it\u2014THHN\/THWN-2 is super durable, rated for both indoor and outdoor use (the \u201cTHWN\u201d part stands for \u201cThermoplastic Heat and Water-resistant Nylon-coated,\u201d and the -2 means it\u2019s good for 90\u00b0C in dry locations, 75\u00b0C in wet), which makes it perfect for running to exterior lights, or even for lighting in commercial spaces where conduit is required. For general lighting with THHN, you\u2019ll still stick with 14-gauge copper, same as NM\u2014just make sure it\u2019s the THWN-2 rating specifically, not the old THHN that only works in dry locations. I see contractors grab the wrong THHN all the time for exterior runs, and that\u2019s a quick way to get a service call later when the wire cracks from water exposure.<\/p>\n<p>Wait, let\u2019s talk about commercial lighting, too\u2014because this isn\u2019t just for houses. If you\u2019re working on a small office, retail space, or restaurant\u2019s general lighting, the rules shift a little. Most commercial spaces use a mix of 120V and 277V lighting (think LED panels, track lighting, maybe exit signs). For 120V commercial general lighting, same as residential: 14-gauge copper, either NM if it\u2019s inside walls, or THHN if it\u2019s in conduit. But for 277V commercial lighting? You still want 14-gauge, but make sure the wire is rated for 277V applications\u2014some THHN wire is only rated for 600V, which is fine, but confirm it\u2019s compatible. I\u2019d also mention that some new construction commercial builds are using MC cable (Metal Clad, the armored stuff) for exposed runs, because it\u2019s safer against physical damage than NM, and you don\u2019t have to pull conduit. MC cable with a 14-gauge copper conductor is another solid pick for general lighting in commercial spaces where you don\u2019t want bare conductors exposed.<\/p>\n<p>Now, the big mistake I see all the time: mixing up gauge sizes. Let\u2019s clear this up once and for all\u2014wire gauge is inversely related to ampacity (the amount of current a wire can safely carry). Thinner number = thicker wire. 14-gauge is thinner than 12-gauge, which is thinner than 10-gauge. So if you use 12-gauge for lighting, that\u2019s 20 amps max, which could work for a heavy lighting circuit, but it\u2019s overkill and costs you extra. If you use 16-gauge (which is thinner than 14) for lighting? That\u2019s only 13 amps max, which is too small for a standard 15-amp circuit\u2014way too much risk of overheating. A lot of DIYers grab 16-gauge from big-box stores because it\u2019s cheaper, but that\u2019s a recipe for a breaker tripping constantly, or even a fire hazard. I\u2019ve had a customer come to me last year with a house where a DIYer used 16-gauge for all their living room lights\u2014they had three recessed cans, a ceiling fan, and a TV on the same circuit, and the wire was overheating so bad the insulation was melting. Don\u2019t cut corners here. Stick to 14-gauge copper for general lighting, 120V, residential or small commercial, and you\u2019re 90% there.<\/p>\n<p>Another thing to consider: where the wire is installed. If you\u2019re running lighting in an attic that gets really hot (like above a kitchen, where temperatures can hit 140\u00b0F in summer), you need to make sure the wire\u2019s insulation is rated for high temps. NM cable comes in different heat ratings\u2014most standard NM is rated for 60\u00b0C, but there\u2019s also NM-B (the \u201cB\u201d stands for \u201cBuilding,\u201d right?) that\u2019s rated for 90\u00b0C. For hot attics or basement runs where there\u2019s insulation contact, go with NM-B, not the old NM. I always tell guys to stock NM-B in their trucks, because it\u2019s versatile for almost all indoor lighting runs. If you\u2019re running outside, like for a patio light or a landscape lighting path? Wait, hold on\u2014landscape lighting is low-voltage (12V or 24V), so that uses low-voltage wire, not the 120V building wire we\u2019re talking about here. Don\u2019t mix those two! I see contractors try to use NM for landscape lights all the time, and that\u2019s a code violation\u2014low-voltage needs its own specific wire, usually copper with a UV-resistant jacket.<\/p>\n<p>Let\u2019s also talk about code, because this isn\u2019t just a suggestion. The NEC (National Electrical Code) is the bible here, and it\u2019s clear: general lighting circuits in 120V systems are 15-amp circuits, which require 14-gauge copper wire. You can\u2019t use aluminum for this because aluminum has higher resistance, so you need a thicker gauge for the same ampacity, which is more expensive, and aluminum wiring requires special connectors to prevent connection issues. So even if aluminum is a little cheaper upfront, it\u2019s not worth the hassle for general lighting. I\u2019ve been in the business long enough to see the bad outcomes of aluminum wiring for lighting\u2014loose connections, overheating, even fires. So copper non-negotiable for general lighting.<\/p>\n<p>Wait, what about older homes? If you\u2019re rewiring a 1950s house that already has knob-and-tube wiring? That\u2019s a whole other story, but for general lighting in that case, you\u2019d still run 14-gauge NM or THHN, because knob-and-tube isn\u2019t suitable for new general lighting circuits. But if you\u2019re replacing existing lights, you\u2019d just match the old wire gauge\u2014most old homes use 14-gauge too, so that\u2019s still fine.<\/p>\n<p>Now, let\u2019s get practical, from a supplier\u2019s perspective. I know contractors are always looking to save time and money, so here\u2019s what I recommend for your lighting jobs: keep a stack of 14\/2 NM-B (that\u2019s two conductors plus a ground wire, which is exactly what you need for most lighting runs\u2014hot, neutral, ground) in your supply truck. For any run that\u2019s going in conduit (exterior, commercial, unfinished areas), stock 14-gauge THWN-2 copper. Don\u2019t overstock 12-gauge for lighting\u2014save that for outlets or heavy appliances. And always, always double-check the wire\u2019s rating: if it\u2019s for a wet location (like a light outside, in a bathroom), make sure it\u2019s listed for wet use. THWN-2 is wet-listed, standard NM is only for dry locations, so if you\u2019re running lighting in a bathroom (which has high humidity), you need a wet-rated wire. I see guys grab standard NM for bathroom lights all the time, and the insulation breaks down within a few years from the moisture.<\/p>\n<p>Let me wrap this up with a quick real example that drove this home for me. Last month, a contractor brought a sample of wire he\u2019d bought from a random online supplier\u2014he used it for a restaurant\u2019s general lighting, and half the circuits kept tripping. He showed me the wire: it was labeled \u201c14-gauge copper,\u201d but when I checked the ampacity, it was a 16-gauge conductor with fake markings. Cheap, counterfeit wire is a real problem, so as a supplier, I make sure all my wire is UL-listed, meets NEC standards, and is clearly marked with the gauge and rating. That\u2019s why it\u2019s important to work with a reputable supplier\u2014you don\u2019t want to risk bad wire on a job, especially for general lighting, which is something people use every single day.<\/p>\n<p>At the end of the day, general lighting wire isn\u2019t rocket science, but it\u2019s not just \u201cany wire.\u201d Stick to 14-gauge UL-listed copper: NM-B for indoor wall\/attic runs, THWN-2 in conduit for exposed or wet locations, and make sure you\u2019re matching the code for your space. No overkill, no underkill, no counterfeits.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.liangyucable.com\/uploads\/48120\/small\/residential-low-voltage-wiring8bddc.jpg\"><\/p>\n<p>If you\u2019re working on a lighting project and need help picking the right wire, or want to make sure you\u2019re stocked with the right stuff for your next job, hit me up\u2014we can walk through exactly what you need, no sales pitch, just real advice from someone who\u2019s been in the field as long as I have.<\/p>\n<p><a href=\"https:\/\/www.liangyucable.com\/building-wire\/\">Building Wire<\/a> References<br \/>\nNational Electrical Code (NEC) Article 210, 2020 Edition<br \/>\nUnderwriters Laboratories (UL) Standard 83, for Non-Metallic Sheathed Cable<br \/>\nUnderwriters Laboratories (UL) Standard 83, for Thermoplastic Insulated Wire and Cable<\/p>\n<hr>\n<p><a href=\"https:\/\/www.liangyucable.com\/\">Hebei Liangyu Cable Co., Ltd.<\/a><br \/>We&#8217;re well-known as one of the leading building wire manufacturers and suppliers in China, specialized in providing high quality customized service. We warmly welcome you to buy durable building wire made in China here and get pricelist from our factory. For price consultation, contact us.<br \/>Address: Yanbai Industrial Zone, Jiajiakou Town, Ningjin County, Xingtai City, Hebei Province<br \/>E-mail: 18932990441@163.com<br \/>WebSite: <a href=\"https:\/\/www.liangyucable.com\/\">https:\/\/www.liangyucable.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Hey everyone, As a building wire supplier who\u2019s fielded hundreds of questions from electricians, contractors, and &hellip; <a title=\"What type of building wire is for general lighting?\" class=\"hm-read-more\" href=\"http:\/\/www.intermediaecuador.com\/blog\/2026\/11\/21\/what-type-of-building-wire-is-for-general-lighting-4b5b-eeb4c4\/\"><span class=\"screen-reader-text\">What type of building wire is for general lighting?<\/span>Read more<\/a><\/p>\n","protected":false},"author":2,"featured_media":3808,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3771],"class_list":["post-3808","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-building-wire-45f2-eef0c6"],"_links":{"self":[{"href":"http:\/\/www.intermediaecuador.com\/blog\/wp-json\/wp\/v2\/posts\/3808","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.intermediaecuador.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.intermediaecuador.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.intermediaecuador.com\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"http:\/\/www.intermediaecuador.com\/blog\/wp-json\/wp\/v2\/comments?post=3808"}],"version-history":[{"count":0,"href":"http:\/\/www.intermediaecuador.com\/blog\/wp-json\/wp\/v2\/posts\/3808\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.intermediaecuador.com\/blog\/wp-json\/wp\/v2\/posts\/3808"}],"wp:attachment":[{"href":"http:\/\/www.intermediaecuador.com\/blog\/wp-json\/wp\/v2\/media?parent=3808"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.intermediaecuador.com\/blog\/wp-json\/wp\/v2\/categories?post=3808"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.intermediaecuador.com\/blog\/wp-json\/wp\/v2\/tags?post=3808"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}